Every boat needs reliable bilge drainage. SEAFLO automatic bilge pumps combine the pump and float switch in one compact unit, making installation straightforward for most DIY boat owners.
Choose the Right Flow Rate
SEAFLO 06 Series pumps are available in 600GPH and 750GPH models for 12V and 24V systems. Match the flow rate to your boat size — larger hulls need higher GPH ratings.
Mounting Location
Install the pump at the lowest point of the bilge where water collects. Use the included mounting bracket or industrial base. Keep the strainer accessible for cleaning.
Wiring & Fuse Protection
Connect through a 3-way switch panel (Automatic-Off-Manual) for full control. Use a 15A fuse on 12V systems. Route wires through a waterproof conduit above the waterline.
Hose Connection
Attach 3/4" discharge hose to the outlet barb. Run the hose to a through-hull fitting above the waterline with a vented loop if needed to prevent backflow.