GM electronic throttle actuator motor circuit open — throttle body may not respond to pedal input.
Common symptoms
- Reduced engine power
- Limp mode
- Idle too high or too low
Typical causes
- Failed throttle body motor
- Open circuit in TAC harness
- Connector at throttle body
- Blown ETCS fuse
What scanner do you need?
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)
Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.
Diagnostic tips
- Record freeze frame data when the code first sets
- Clear the code only after fixing the root cause
- Check for related pending codes that point to a common issue
- Verify battery voltage is above 12.4V before chasing sensor codes