P0148
System
Powertrain (Emissions)
Scanner required
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

O2 Sensor Circuit Low Voltage (Bank 2 Sensor 3)

Understand P0148, common causes, and the right SEAFLO pump to diagnose it.

Bank 2 sensor 3 O2 circuit voltage low.

Common symptoms

  • Check engine light
  • Failed smog

Typical causes

  • Short to ground in sensor circuit
  • Failed sensor
  • Damaged harness near exhaust

What scanner do you need?

Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Frequently asked questions

Can I diagnose P0148 with a basic code reader?
P0148 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P0148?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.