C0220
System
Chassis (ABS / Stability)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

ABS Pump Motor Circuit Open

Understand C0220, common causes, and the right SEAFLO pump to diagnose it.

Open circuit to ABS pump motor — no hydraulic pressure build for ABS modulation.

Common symptoms

  • ABS light
  • No ABS function

Typical causes

  • Cut wire to pump
  • Unplugged connector at ABS module
  • Failed pump motor windings

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Frequently asked questions

Can I diagnose C0220 with a basic code reader?
C0220 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with C0220?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.